STAMPED is an acronym and stands for the seven major information areas required to provide a quality hose, gasket and product assembly to produce solutions for your exact specifications and needs for the customer, as follows:
S stands for SIZE; I.D., O.D. and length
T stands for TEMPERATURE of the material conveyed and environmental
A stands for the APPLICATION, the conditions of use
M stands for the MATERIAL being conveyed, type and concentration
P stands for the PRESSURE to which the assembly will be exposed
E stands for ENDS; style, type, orientation, attachment methods, etc.
D stands for DELIVERY; testing, quality, packaging, and delivery requirements
2. Electrical conductivity
5. Flow rate
6. Fluid velocity
7. Movement (type, distance, frequency)
|9. Permeation (vapor conveying hose)|
11. Salt water
12. Static electricity
13. Ultraviolet light
14. Vibration (frequency rate – Hz, amplitude “G” load)
If you wish to submit the form electronically use this link STAMPED Online (new window/tab will open).
If you wish to fax or scan the form use the PDF located here STAMPED PDF (new window/tab will open).
For general inquiries, complete our quick quote form.
Custom Fabrication Specialists In Industrial Hoses, Hydraulic Hoses and Gaskets
"IRG has always been very responsive to our needs. They are readily available when we have breakdowns and production issues. Their prices are competitive and they always follow-up to make sure we have what we need. They have an experienced, knowledgeable staff, and they are a pleasure to do business with."
-Scott VanWinkle, Senior Manufacturing Engineer, Cummins Filtration Cookeville
"Our company has been doing business with IR-G for over 10 years. During that time, they have checked our inventory once a week and kept it at an acceptable level. Any hose or special fittings we need they supply in a timely manner. The pricing has always been competitive and invoicing comes in a timely manner, too."
-John Ashworth, Material Handling Resources
"Through my progression as project engineer, maintenance supervisor and technical services manager, I can personally attest to the high-level of customer service and professionalism that has always been demonstrated by IR-G. Whether it was helping me to properly design/redesign various fluid components, or to open the store in the middle of the night to keep our production lines running, IR-G was always there to help."
-Jeremy Estes, Masonite International
"IR-G has shown us that they not only care for our supply needs, but on several occasions they've deeply involved with our Engineering Department in trouble shooting issues. It’s a pleasure to do business with a company that doesn’t walk away when problems arise."
-Derold G. Hines, A. Schulman, Inc.
"IR-G is a great source for Perma Pipe’s gasket needs and rubber materials for high temp products. Our customer base has very critical high temp specifications and IRG always meets or exceeds those requirements. Perma Pipe is a very demanding customer of IR-G and as a buyer of your products and sources greatly appreciate all the hard work IR-G puts forth to meet our customer demands. Perma Pipe is a manufacture of high temp custom engineered underground insulated piping systems for district heating and cooling. Great job for the team."
-Sandy Blackwell, Perma-Pipe, Inc.
"IR-G delivers excellent service for my commercial brewery needs. We built our brewery one piece at a time and the folks at IR-G were more than willing to help with small parts, fittings, lubricant, regulators, gaskets, pipe, gauges and hoses. We had a lot of questions in the beginning and IR-G gave us the answers and the parts to make it work. I can walk in and walk out with whatever I need to get the job done. I would not be where I am today without their help. Seriously, IR-G is way more than a supply house. Get your parts where pros get theirs.
-Scott Swygert, Honky Tonk Brewing Company
"I just want to take a moment to say thank you for the wonderful service and help that Industrial Rubber and Gasket has been for us over the years. Eddie and Corey have been a pleasure to work with. In addition to keeping up with our needs on a regular basis, IR-G has literally “saved our ship” on more than one occasion. The products, such as sandblast hose, have been top notch. And the saying, “there’s no job too small” holds true, too. Thank y’all!"
-AC Knoblock, Purchasing Manager, Gate Precast Company
"Thank you for the product that your Clarksville office was able to fabricate which eliminated a potential safety issue with our propane bottles. We contacted the Clarksville location a few weeks ago, to see if it was possible to fabricate a propane hose ¼” x 50’ with a fire jacket covering 12’ from the hose connection to the tank. Current weed burner torches only come with a 6’ hose when you buy the torch handle. We needed it to be much longer in order to safely locate the tank away from a large heat source. IR-G responded immediately and took the time to go to the area to look at the issue. They were able to provide an immediate on the job solution. The hose was ordered, fabricated, and delivered 3 days after looking at the scenario. The hose is still in use and working great.