Emergency Service 800-457-1818 info@ir-g.com



engineering and design

Engineering and Design

Do you have a material specification requirement or a need to know the material chemical compatibility?

From engineering and design to installation and training support, our services may be engaged at any stage in your project. While we love to partner with you from start to finish, our engineering and design services are offered a la carte to support your needs. Turn it over to our engineering and design group and let them put their knowledge and experience to work for you!

inventory management

Inventory Management

IR-G offers several inventory management programs including Kanban, JIT, VMI, blanket order, and more.

Our technical staff has decades of inventory management experience, establishing and operating various programs, and are supported by broad resources to address your procurement needs. Whether it’s providing complete hose or gasket kitting, hose and conveyor belt surveys, or organizing and designing bins with a customized numbering system, we’re here to help!

waterjet gasket cutting

Waterjet Gasket Cutting

Do you need precisely cut material? With two Waterjet cutting machines, IR-G can meet your needs.

Using a powerful 55,000 psi stream of water that cuts cleanly and evenly every time, Water-Jet cutting provides extremely accurate cuts with a high degree of repeatability over a wide range of materials and endless shapes and configurations. IR-G offers two water-jets with table sizes at 10’ x 5’, 8’ x 4’, and 2’ x 3’ with the capability to cut materials up to 6” thick to cover all your cutting needs.

mobile hydraulic trucks

Mobile Hydraulic Trucks

You call, we come to you! Like Real Estate, hose repair is all about location.  Your location–Our mobile Hydraulic Trucks come to you for Hydraulic Hose Repair and Service in the Greater Nashville area.

Our fleet is fully outfitted and staffed with experienced technicians, ensuring the highest level of on-site hydraulic hose repair, replacement, and maintenance needs. Our team members will get you back on track, so you can minimize precious down time.

Metal Hose Welding

Metal Hose Welding

When you need a custom metal hose, let IR-G be your supplier of choice!

Our metal hose welding of carbon steel, 304 and 316 is done in-house (up to 12″), by trained and certified welders. Each hose is pressure tested for Quality Assurance, and made according to NAHAD Hose Safety Institute (HSI) standards. You can expect a high-performing and quality hose each and every time you work with us. Since 1989 we’ve provided best-in-class service and competitive prices.  Think of IR-G for all your hose and fitting needs and contact us today!

Refurbishing services

Refurbishing Services

IR-G offers refurbishing of rollers, rotors, valves, valve stems, plugs, pumps and heat exchanger units. 

At IR-G, we provide regasketing, replacement gaskets, replacement plates, quality checks and tests of heat exchanger units as part of our specialized solutions. In addition, we can also custom design new units. Just call 800-457-1818, or any of our Branch Locations,  or complete the form below to find out how we can support your refurbishing needs.


"IRG has always been very responsive to our needs. They are readily available when we have breakdowns and production issues. Their prices are competitive and they always follow-up to make sure we have what we need. They have an experienced, knowledgeable staff, and they are a pleasure to do business with."

-Scott VanWinkle, Senior Manufacturing Engineer, Cummins Filtration Cookeville


"Our company has been doing business with IR-G for over 10 years. During that time, they have checked our inventory once a week and kept it at an acceptable level. Any hose or special fittings we need they supply in a timely manner. The pricing has always been competitive and invoicing comes in a timely manner, too."

-John Ashworth, Material Handling Resources


"Through my progression as project engineer, maintenance supervisor and technical services manager, I can personally attest to the high-level of customer service and professionalism that has always been demonstrated by IR-G. Whether it was helping me to properly design/redesign various fluid components, or to open the store in the middle of the night to keep our production lines running, IR-G was always there to help."

-Jeremy Estes, Masonite International


"IR-G has shown us that they not only care for our supply needs, but on several occasions they've deeply involved with our Engineering Department in trouble shooting issues. It’s a pleasure to do business with a company that doesn’t walk away when problems arise."

-Derold G. Hines, A. Schulman, Inc.


"IR-G is a great source for Perma Pipe’s gasket needs and rubber materials for high temp products. Our customer base has very critical high temp specifications and IRG always meets or exceeds those requirements. Perma Pipe is a very demanding customer of IR-G and as a buyer  of your products and sources greatly appreciate all the hard work IR-G puts forth to meet our customer demands. Perma Pipe is a manufacture of high temp custom engineered underground insulated piping systems for district heating and cooling. Great job for the team."

-Sandy Blackwell, Perma-Pipe, Inc.


"IR-G delivers excellent service for my commercial brewery needs. We built our brewery one piece at a time and the folks at IR-G were more than willing to help with small parts, fittings, lubricant, regulators, gaskets, pipe, gauges and hoses. We had a lot of questions in the beginning and IR-G gave us the answers and the parts to make it work. I can walk in and walk out with whatever I need to get the job done. I would not be where I am today without their help. Seriously, IR-G is way more than a supply house. Get your parts where pros get theirs. 

-Scott Swygert, Honky Tonk Brewing Company


"I just want to take a moment to say thank you for the wonderful service and help that Industrial Rubber and Gasket has been for us over the years. Eddie and Corey have been a pleasure to work with. In addition to keeping up with our needs on a regular basis, IR-G has literally “saved our ship” on more than one occasion. The products, such as sandblast hose, have been top notch. And the saying, “there’s no job too small” holds true, too. Thank y’all!"

-AC Knoblock, Purchasing Manager, Gate Precast Company


"Thank you for the product that your Clarksville office was able to fabricate which eliminated a potential safety issue with our propane bottles. We contacted the Clarksville location a few weeks ago, to see if it was possible to fabricate a propane hose ¼” x 50’ with a fire jacket covering 12’ from the hose connection to the tank. Current weed burner torches only come with a 6’ hose when you buy the torch handle. We needed it to be much longer in order to safely locate the tank away from a large heat source. IR-G responded immediately and took the time to go to the area to look at the issue. They were able to provide an immediate on the job solution. The hose was ordered, fabricated, and delivered 3 days after looking at the scenario. The hose is still in use and working great.



"I just wanted to thank you again for the excellent service that you provide to us at HB Specialty Foods. This is the second time that I know of that you have saved us from extended production downtime! It is so nice to have a local business that is willing to go the extra mile when it comes to personal customer service and I just wanted you to know that it is VERY MUCH Appreciated!!"

Scott Hoff, Maintenance Manager, HB Specialty Foods